
ADP8863
Comparator Level 3 Threshold (L3_TRP)—Register 0x1F
Table 73. L3_TRP Bit Map
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
L3_TRP
Table 74. Bit Descriptions for th e L3_TRP Register
Bit Name
L3_TRP
Bit No.
7:0
Description
Comparator Level 3 threshold. If the comparator input is below L3_TRP, the comparator trips and the
backlight enters Level 3 (dark) mode. The following lists the code settings for photosensor current:
00000000 = 0 μA
00000001 = 0.54 μA
00000010 = 1.08 μA
00000011 = 1.62 μA
…
11111111 = 137.7 μA
Comparator Level 3 Hysteresis (L3_HYS)—Register 0x20
Table 75. L3_HYS Bit Map
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
L3_HYS
Table 76. Bit Descriptions for th e L3_HYS Register
Bit Name
L3_HYS
Bit No.
[7:0]
Description
Comparator Level 3 hysteresis. If the comparator input is above L3_TRP + L3_HYS, the comparator trips
and the backlight enters Level 2 (office) mode. The following lists the code settings for photosensor
current hysteresis:
00000000 = 0 μA
00000001 = 0.54 μA
00000010 = 1.08 μA
00000011 = 1.62 μA
…
11111111 = 137.7 μA
First Phototransistor Register: Low Byte (PH1LEVL)—Register 0x21
Table 77. PH1LEVL Bit Map
Bit 7
Bit 6
Bit 5
Bit 4
Bit 3
Bit 2
Bit 1
Bit 0
PH1LEV_LOW
Table 78. Bit Descriptions for th e PH1LEVL Register
Bit Name
PH1LEV_LOW
Bit No.
[7:0]
Description
Lower eight bits of the 13-bit conversion value for the first light sensor (Bit 7 to Bit 0). The value is
updated every 80 ms (when the light sensor is enabled). This is a read-only register.
Rev. A | Page 46 of 52